Data Sheet
ADuM5401/ADuM5402/ADuM5403/ADuM5404
Table 27 illustrates how iso Power devices can provide many combinations of data channel count and multiples of the single unit power.
Table 27. Configurations for Power and Data Channels
Number of Data Channels
Power Unit
1-Unit Power
0 Channels
ADuM5000 master
2 Channels
ADuM520x master
4 Channels
ADuM5401 to ADuM5404 master
6 Channels
ADuM5401 to ADuM5404 master
ADuM121x
2-Unit Power
3-Unit Power
ADuM5000 master
ADuM5000 slave
ADuM5000 master
ADuM5000 slave
ADuM5000 slave
ADuM5000 master
ADuM520x slave
ADuM5000 master
ADuM5000 slave
ADuM520x slave
ADuM5401 to ADuM5404 master
ADuM520x slave
ADuM5401 to ADuM5404 master
ADuM5000 slave
ADuM5000 slave
ADuM5401 to ADuM5404 master
ADuM520x slave
ADuM5401 to ADuM5404 master
ADuM520x slave
ADuM5000 slave
INSULATION LIFETIME
All insulation structures eventually break down when subjected to
voltage stress over a sufficiently long period. The rate of insulation
degradation is dependent on the characteristics of the voltage
waveform applied across the insulation. In addition to the testing
performed by the regulatory agencies, Analog Devices carries
out an extensive set of evaluations to determine the lifetime
of the insulation structure within the ADuM5401 / ADuM5402 /
ADuM5403 / ADuM5404 devices.
Analog Devices performs accelerated life testing using voltage levels
higher than the rated continuous working voltage. Acceleration
factors for several operating conditions are determined. These
factors allow calculation of the time to failure at the actual working
voltage. The values shown in Table 20 summarize the peak voltage
for 50 years of service life for a bipolar ac operating condition
and the maximum CSA/VDE approved working voltages. In
many cases, the approved working voltage is higher than the
50-year service life voltage. Operation at these high working
voltages can lead to shortened insulation life in some cases.
The insulation lifetime of the ADuM5401 / ADuM5402 /
ADuM5403 / ADuM5404 devices depends on the voltage wave-
form type imposed across the isolation barrier. The i Coupler
In the case of unipolar ac or dc voltage, the stress on the insulation
is significantly lower. This allows operation at higher working
voltages while still achieving a 50-year service life. The working
voltages listed in Table 20 can be applied while maintaining the
50-year minimum lifetime, provided that the voltage conforms
to either the unipolar ac or dc voltage cases.
Any cross-insulation voltage waveform that does not conform
to Figure 31 or Figure 32 should be treated as a bipolar ac wave-
form and its peak voltage limited to the 50-year lifetime voltage
value listed in Table 20. The voltage presented in Figure 32 is
shown as sinusoidal for illustration purposes only. It is meant to
represent any voltage waveform varying between 0 V and some
limiting value. The limiting value can be positive or negative,
but the voltage cannot cross 0 V.
RATED PEAK VOLTAGE
0V
Figure 30. Bipolar AC Waveform
RATED PEAK VOLTAGE
insulation structure degrades at different rates depending on
whether the waveform is bipolar ac, unipolar ac, or dc. Figure 30,
Figure 31, and Figure 32 illustrate these different isolation
0V
Figure 31. DC Waveform
voltage waveforms.
Bipolar ac voltage is the most stringent environment. The goal
of a 50-year operating lifetime under the bipolar ac condition
determines the maximum working voltage recommended by
Analog Devices.
RATED PEAK VOLTAGE
0V
NOTES:
1. THE VOLTAGE IS SHOWN AS SINUSOIDAL FOR ILLUSTRATION
PURPOSES ONLY. IT IS MEANT TO REPRESENT ANY VOLTAGE
WAVEFORM VARYING BETWEEN 0V AND SOME LIMITING VALUE.
THE LIMITING VALUE CAN BE POSITIVE OR NEGATIVE, BUT THE
VOLTAGE CANNOT CROSS 0V.
Figure 32. Unipolar AC Waveform
Rev. C | Page 25 of 28
相关PDF资料
ADUM6132ARWZ-RL IC GATE DRIVER ISOLATED 16-SOIC
ADUM6201CRIZ ISOLATED DC-DC CONV 2CH 16SOIC
ADUM6404ARWZ IC ISOLATOR 4CH DCDC CONV 16SOIC
ADUM7241CRZ-RL7 ISOLATOR DGTL 1KVRMS 2CH 8SOIC
ADUM7440CRQZ-RL7 IC DIGITAL ISOLATOR 4CH 16QSOP
ADUM7510BRQZ IC DGTL ISOLATOR 5CH 16QSOP
ADZS-21364-EZLITE KIT EVAL EZ LITE ADDS-21364
ADZS-21371-EZLITE KIT EVAL EZLITE ADZS-21371
相关代理商/技术参数
ADUM5404CRWZ1 制造商:AD 制造商全称:Analog Devices 功能描述:Quad-Channel Isolators with Integrated DC-to-DC Converter
ADUM5404CRWZ2 制造商:AD 制造商全称:Analog Devices 功能描述:Quad-Channel Isolators with Integrated DC-to-DC Converter
ADUM5404CRWZ-RL 功能描述:IC ISOLATOR 4CH DCDC CONV 16SOIC RoHS:是 类别:隔离器 >> 数字隔离器 系列:IsoPower®, iCoupler® 产品培训模块:IsoLoop® Isolator 标准包装:50 系列:IsoLoop® 输入 - 1 侧/2 侧:5/0 通道数:5 电源电压:3 V ~ 5.5 V 电压 - 隔离:2500Vrms 数据速率:110Mbps 传输延迟:12ns 输出类型:CMOS 封装/外壳:16-SOIC(0.154",3.90mm 宽) 供应商设备封装:16-SOIC N 包装:管件 工作温度:-40°C ~ 85°C 其它名称:390-1053-5
ADUM540X 制造商:AD 制造商全称:Analog Devices 功能描述:Isolated DC/DC Converter
ADUM540XWXRWZ 功能描述:DGTL ISO 2.5KV GEN PURP 16SOIC 制造商:analog devices inc. 系列:* 零件状态:上次购买时间 标准包装:1
ADUM5410BRSZ 功能描述:RS232 Digital Isolator 2500Vrms 4 Channel 150Mbps 75kV/μs CMTI 24-SSOP (0.209", 5.30mm Width) 制造商:analog devices inc. 系列:iCoupler? 包装:管件 零件状态:在售 技术:磁耦合 类型:RS232 隔离式电源:是 通道数:4 输入 - 输入侧 1/输入侧 2:4/0 通道类型:单向 电压 - 隔离:2500Vrms 共模瞬态抗扰度(最小值):75kV/μs 数据速率:150Mbps 传播延迟 tpLH / tpHL(最大值):13ns,13ns 脉宽失真(最大):3ns 上升/下降时间(典型值):2.5ns,2.5ns 电压 - 电源:1.7 V ~ 5.5 V 工作温度:-40°C ~ 105°C 封装/外壳:24-SSOP(0.209",5.30mm 宽) 供应商器件封装:24-SSOP 标准包装:59
ADUM5410BRSZ-RL7 功能描述:RS232 Digital Isolator 2500Vrms 4 Channel 150Mbps 75kV/μs CMTI 24-SSOP (0.209", 5.30mm Width) 制造商:analog devices inc. 系列:iCoupler? 包装:带卷(TR) 零件状态:在售 技术:磁耦合 类型:RS232 隔离式电源:是 通道数:4 输入 - 输入侧 1/输入侧 2:4/0 通道类型:单向 电压 - 隔离:2500Vrms 共模瞬态抗扰度(最小值):75kV/μs 数据速率:150Mbps 传播延迟 tpLH / tpHL(最大值):13ns,13ns 脉宽失真(最大):3ns 上升/下降时间(典型值):2.5ns,2.5ns 电压 - 电源:1.7 V ~ 5.5 V 工作温度:-40°C ~ 105°C 封装/外壳:24-SSOP(0.209",5.30mm 宽) 供应商器件封装:24-SSOP 标准包装:500
ADUM5411BRSZ 功能描述:RS232 Digital Isolator 2500Vrms 4 Channel 150Mbps 75kV/μs CMTI 24-SSOP (0.209", 5.30mm Width) 制造商:analog devices inc. 系列:iCoupler? 包装:管件 零件状态:在售 技术:磁耦合 类型:RS232 隔离式电源:是 通道数:4 输入 - 输入侧 1/输入侧 2:3/1 通道类型:单向 电压 - 隔离:2500Vrms 共模瞬态抗扰度(最小值):75kV/μs 数据速率:150Mbps 传播延迟 tpLH / tpHL(最大值):13ns,13ns 脉宽失真(最大):3ns 上升/下降时间(典型值):2.5ns,2.5ns 电压 - 电源:1.7 V ~ 5.5 V 工作温度:-40°C ~ 105°C 封装/外壳:24-SSOP(0.209",5.30mm 宽) 供应商器件封装:24-SSOP 标准包装:59